Hey!
I was just talking to Matt (93luminaz34) about putting poly bushings on the sway bars when I do my suspension mods this summer.
I would like to go over to all poly bushings where ever I can, so I started looking on energy suspensions website and I found some kits for 1988 Grand Prixs, but nothing newer. I'm guessing that there must be some differences if they don't list up to 96. I could of sworn that the 88s were a first gen, but one of the packages includes rear coil spring isolators and almost looks to be for a rear wheel drive car :confused: I put a star beside the applicable link below
What are the differences? and would any of the following kits work for me?
*
http://www.energysuspensionparts.com/proddetail.asp?prod=3%2E18110&cat=1762http://www.energysuspensionparts.com/proddetail.asp?prod=3%2E3156&cat=1762http://www.energysuspensionparts.com/proddetail.asp?prod=3%2E3132&cat=1762http://www.energysuspensionparts.com/proddetail.asp?prod=9%2E8117%5FFront&cat=1762I'm hoping that one of these kits will work, cause they are somewhat reasonably priced and won't kill my budget. I was going to go with BMR trailing arms and lateral links, but at $810cdn shipped, I can't justify the extra cost. The plan is to now go with trailing arms and possibly lateral links from a second gen, all are the same length I'm told, however I'm unsure if the 2nd gen lateral links are tubular, if not there is no point in going over to them.
Thanx
Jamie
Topic: Looking for poly bushing kits (Read 781 times)
